Altium Component Library Download

Library Management / Manual Component Symbol Creation

Altium Libraries Downloads Software Lucky Downloads search v.1.1 Lucky Downloads search is a free utitity that enables you to search for thousands of downloads in Internet. After downloading the Altium Library, you Import the library into the software by: + Press D B to bring up the tab libraries + Click the Libraries button, the Available Libraries window appears, click the Installed tab, and then click install + Select the path to the library leg components.PcbLib extension, then select and press OK is done.

Library Management

In a previous chapter, we started to create a component that can be used with Altium 365 technology. We understand that you might want to use local libraries as you used to, but we strongly recommend that you use Altium 365 because it gives you a wide range of new features when working with components. This chapter shows an example of how to create a symbol and footprint in a local library. In the scope of this chapter, we will create a SchLib with a symbol for our component and in chapter 5.4 we will create a PcbLib with a footprint for it and complete the component creation.

We will create a transistor pack MBT3904DW1T1G consisting of two transistors in one 6-TSSOP package. It is best to make a symbol for this component using the multi-part feature.

Select File > New > Library > Schematic Library from the main menus to create a new local schematic library. The symbol editor will open in your design space. Open the Properties and SCH Library panels if they are not already open.

We need to define a name for the symbol and component. In the Design Item ID field (the name of the symbol) of the Properties panel, enter MBT3904DW1T1G. This name will be used when searching for the component in the Components panel.

Enter Q? in the Designator field. This field is used when annotating components and differs for each component type. The first letter represents a common component type, such as C for Capacitors, R for Resistors, etc. A question mark after the letter is used to define the variable numeric part of the component. After annotation, the question mark becomes the unique component identifier number, such as Q5, which is mandatory for the next steps of the design process.

Enter Dual General Purpose NPN Transistors, 40V, 0.2A, SOT-363 in the Description field. This field is shown by default while searching for components in the Components panel so it can be helpful to enter all the important values to make searching more precise.

When a component has different functional groups or repeating identical parts (e.g., resistor and transistor packs), it is more convenient to implement it with a multi-part component. In this case, the component MBT3904DW1T1G consists of two NPN transistors, which are more convenient to present in the form of such a symbol. Let's add the second functional part of the symbol.

In the SCH Library panel, select the MBT3904DW1T1G component then select Tools > New Part from the main menus. An icon appears at the left of the part name in the Design Item ID column. Click on it to expand the symbol and show all its parts. Select Part A to make that part active.

Select Place > Pin Iver johnson serial number history. from the main menus to start pin placement. Press the Tab key to open the Properties panel to edit the properties of the pin being placed. In the Properties panel, define the Designator as 1 and Name as E. Click the visibility icon to the right of the Name field to hide the name. In the Electrical Type drop-down, select Passive then enter 200 mils for the Pin Length. In the Font Settings region, enable Custom Settings in the Designator region then use the drop-down to select Arial for the Designator. Click the pause button in the design space then place the pin as shown in the figure below using the Spacebar to rotate the pin.

Warning: Always pay attention to the direction of a placed pin. The connection point of a pin is determined by a small gray crosshair attached to the mouse cursor and by four small white points on the placed pin. If you place the pin with the wrong connection point direction, it will be impossible to connect a track to it.

Place two more pins as shown in the figure below. Set B as the name for pin number 2 and C as the name of pin number 6. Hide both names using the approach described above.

Tip: You can place pins with the same properties quickly by copying and placing pin 1 twice then changing the designator and name values of the copied pin(s).

The graphic part of the symbol can be formed by the placement of any graphical primitives, such as lines, rectangles, arcs, and polygons. Using Place > Line from the main menus, draw three lines as shown in the figure below. To place the lines at an angle, use the Spacebar to change the drawing mode.

After placement, select all drawn lines and define their color as blue using the Properties panel. Right-click to finish line placement.

Tip: Grid size can be switched by pressing the G key.

Altium Footprint Library Download

Now we will add the last detail - an arrow indicating the type of transistor. In this case, it is an NPN transistor, so the arrow must be placed in the direction of the emitter, which is represented by pin 1. Select Place > Polygon from the main menus. Press Tab to open the Region mode of the Properties panel then define the parameters as shown in the figure below.

Using the G shortcut key, change the grid to 10 mil then draw an arrow as shown in the figure below.

The first part of the symbol is finished and now we need to finish Part B to make the symbol complete. Select all primitives in Part A and copy them. Select Part B in the SCH Library panel and place the copied primitives. To complete the symbol, do the following in Part B:

  • Change Pin 1 designator to Pin 4
  • Change Pin 2 designator to Pin 5
  • Change Pin 6 designator to Pin 3
Part B of the symbol should now look like the figure below.

Altium Component Library Download

Symbols for our component have been completed, so we can save the schematic library. Select File > Save from the main menus and save your library to a convenient location. Our component is not complete yet since we have no footprint for it. A footprint with the corresponding PCB library for this component will be created in Chapter 5.4. Leave this tab open in order to have quick access to it in Chapter 5.4.

Altium vault component library download

Altium Component Library Download Torrent

Tip: You can add new symbols to your library by clicking the Add button below the footprint list in the SCH Library panel.

Altium Library Tutorial

Thank you Glad to hear it