Cccam Script Installer

admin 22.02.2021

Here is a tutorial on the installation and configuration of CCcam on the Vu+ decoder under a BlackHole 3.0.4 image and CCcam 2.2.1 .

IMPORTANT: This tutorial is valid for all versions of BLACKHOLE 2.x.x and 3.x.x.

Select Install extensions. Press OK to select IPK. Next press GREEN Button to Start Installation. Please wait while installing CCCAM softcam. After installation press EXIT. Copy of the CCCam subscription. Copy subscription files from your PC to the /etc path of your receiver. Press BLUE Button to launch Pannel. Here is the latest CCcam files version CCcam 2.3.2 for the 4K – UHD receivers with ARM processors, and also Normal receivers with MIPS processors. Continue Reading.deb.ipk 4K CCcam download Vu+ Solo 4K Vu+ Ultimo 4K Vu+ Uno 4K Vu+ Zero 4K. And after to install reboot your box and check iptv list see and enjoy DM 800HD PVR / DM 800 HD se best box for iptv This is essentially a high definition version of the DM 600 PVR, featuring a single pluggable DVB tuner (S/S2, C or T), a 300 MHz MIPS processor, 64 MiB of Flash memory, 256 MiB of RAM and room for an internal SATA 2.5 in disk.

For this tutorial you need.

Material:
Vu + ZERO, UNO, DUO, DUO 2, ULTIMO, SOLO, SOLO 2, SOLO SE, SOLO 4k, UNO 4k, UNO 4K SE, DUO 4K, ZERO 4K, ULTIMO 4K.

Software:

Winscp

CCcam 2.2.1 softcam for Blackhole image for MIPS CPU like Vu+ ZERO, UNO,SOLO, SOLO 2, ULTIMO, DUO

CCcam 2.3.2 softcam for Blackhole image for ARM CPU (all Vu+ 4K receiver like SOLO 4K, UNO 4K, ZERO 4k,… )

To get the latest CCCAM IPK files please visit our SOFTCAM page

A CCcam subscription – If you do not have a CCcam subscription you can order it here

1- Installing the CCcam 2.1.4 plugin

– Launch WINSCP in the home window

File protocol: FTP

Hot name: 192.168.1.100 (ip address of your VU+ )

User name: root

Password: “empty” by default the root password in BlackHole is empty (no password)

After clicking on Login

Select the cccam-2.2.1-only-bin-blackhole_04.04.2013_all.ipk file and drag between the two windows to the /tmp folder.

Press Greenbutton to launch Black Hole Green Pannel

Next press the yellowbutton on the remote

Choose Manually install ipk package

Choose the cccam-2.2.1-only-bin-blackhole_04.04.2013_all.ipk and press OK

Choose YES to confirm installation

Please wait while installing CCCAM softcam

Press OK to complete the installation, the GUI will restart, it will take a few seconds.

2. Copy of the CCCam subscription

Copy subscription files from your PC to the /etc path of your receiver.

CCcam.cfg

CCcam.prio

CCcam.providers

3. Starting CCCam

Press the bluebutton on the remote control to launch BLUE PANNEL

then choose the CCcam 2.2.1 softcam, press OK to start it

Please wait while starting CCcam 2.2.1

Cccam Script Installer Free

This script will install latest svn source of oscam from streamboard,
it also installs init.d startup script, crash check and restart script
and if you choose in the menu of this script it will also install
pcsc omnikey driver for both 32 and 64 bit systems.
It also has a option to install latest libusb-dev for smartreader support.

This script will give you a good starting point with configs
and a proper log solution.

crash check script will parse logs for errors and will restart
oscam if undesired messages are logged.

OScam binary is placed here: /usr/bin/
Log directory: /var/log/oscam/
Config directory: /usr/etc/

Restart script: /etc/init.d/restart.sh
init.d start script: /etc/init.d/oscam

when install is done go tohttp://your-ip:8888
login: root:root

This values are recommended to change after you have logged in

For now this script works only with Debian / ubuntu 32 and 64 bit,
in ubuntu you need to have root user to be able to run it,
sudo is not good enough

Should you have any good ideas for improvements or new functions
please let me know.

To start or stop oscam you should only use this commands:
/etc/init.d/oscam start
/etc/init.d/oscam stop
/etc/init.d/oscam restart

apt-get -y install subversion svn co svn://svn.speedbox.me/svn/oscam-install/trunk oscam chmod -R 0755 oscam cd oscam ./install

Cccam Script Installer App

If you have used this script and want to update to a
later OR SPECIFIC svn version of oscam use update selection in ./install.

Cccam Script Installer Download

This script will prompt you with a menu asking if you want to
update to latest svn version of oscam or if you want to update
to a specific version,
if you choose specific enter the svn version number and hit enter.