Added BMW F series key from Hella 434 920-15 Advantages of obd2store.com HexProg ECU Cloning Tool: 1. Safety while using: Will not corrup the EEPROM or D-Flash from CAS4 and CAS4+. We can assure you that HexTag is the safest tool in the world. BMW Diagnostic Tool Review TOP 10Power by BMW ICOMNO.2 BMW GT1NO.3 BMW OPPS / BMW OPSNO.4 BMW Dash Scanner 3 in 1NO.5 BMW Scanner. FRM3 module (Footwell Module) is used on: BMW E81, E82, E84, E87, E89, E90, E91, E92, E93, E70, E71, E72 series. And Mini R55, R56, R57, R58, R59, R60, R61 series FRM has three connectors, Two 51-pin connectors connect the main wiring harness. Another 26-pin connector is for the connection to the dashboard. BMW Factory Scan Tools. BMW's factory tool is the PC based Online Service System (O.S.S.). Includes a number of components and provides extensive service functionalities. Integrated into BMW's O.S.S. Are software modules for both diagnostic.
Original HexTag Programmer with BDM Functions
Note: this tool do not accept return for refund, just accept one year warrantry for repair, please know this.
HexTag Programmer with BDM functions (BMW CAS series, Porsche BCM, Audi/VW,..etc), Mileage EEPROM reset, Key reset, and more
HexProg Software Version: 1.0.8
Top 3 Reasons to Get HexTag Programmer:
1. Safety while using: All of us heard about Chinese tools corruping the EEPROM or D-Flash from CAS4 and CAS4+. We can assure you that HexTag is the safest tool in the world.
2. Ease of usage: HexTag is considered the most user friendly tool, you can with a few clicks complete the most complicated jobs, like repairing a module (FRM3), resetting mileage, retrieving or modifying ISN, Change VIN,etc.
.vid file download free full version. 3. Competitive price for users even if compared to low quality chinese tools.
Unlike most other tools HexTag takes care to the power supply for the connected control unit, the power monitoring system in HexTag monitors current and voltage supplied to the control unit which allows a very safe operation while reading/writing data. HexTag will shutdown power supply in a range of 10ms when it detectes a shortage or a high power consumption.
HexTag Programmer Functions:
Read and write safely CAS2,CAS3, CAS3+, CAS4, CAS4+ all flashs without removing any component.
Read and write safely Porsche BCM without removing component
Repair corrupted EEPROM in CAS3+
Edit CAS3+ and CAS4 ISN and VIN
Reset mileage for CAS
Repair FRM in just one click
Read and write many other modules in different car models like Mercedes Benz, Audi, Land Rover, VW,.etc
Dashboard EEPROM Reset like M35080, 080D0WQ, 160D0WQ,..
Key Renew for many brands like Audi, BMW, Porsche, Land Rover, VW, Chrysler, Renault,..
HexTag Programmer Package Including:
HexTag Programmer main unit
BDM Cable (wires are same quality used in aerospace)
Tricore Boot mode cable (For future added functions like Ecu clone)
OBD Cable (For future added functions like Ecu tuning and making keys)
Module/adapter for renew keys and read/write SOP-8 EEPROM
SOP-8 High quailty Clip to read/write EEPROM and reset mileage on bench
Hexprog software version 1.0.8 is available for Hextag tool users with new amazing featurs.
HexProg can clone Ecus, It's free for all users during 2019, any user has Hextag can start using this function now.
Porsche BCM 1N35H is more stable now
EEPROM unlock function has been improved
Audi key reset for ATJ807 is supported in this version
BMW 315 HUF5662 key is supported in this version
BMW China KeylessGo E Series is supported in this version
BMW China 434 F Series is supported in this version
Mini 315 Remote Data has been corrected
Shipping and delivery;Attention:
YANWEN Express: 7-14 working days on the way, no need to pay tax for most european counties.
EMS: 6-10 working days on the way. To Russian only send by EMS. For some remote area, if you do not want to pay remote fee, we can send it to you by EMS too.
Aramex: 5-10 working day. To most middle east counries. If you do not like this shipping method, please leave message on your order.
Flat airmail: 7-18 working days on the way. For remote area or holiday, need more time.
If you needs YANWEN express shipping or other shipping method like UPS, TNT, FedEx and so on, or you have special needs for your order, such as declared name and so on, please leave message on the order to notify us. Otherwise we will send the order as our usual practice.
As different country has different import policy, sometimes we will change the shipping method based on the counties and goods.
When you get the parcel, before sign for acceptance, please check the package to make sure the product is correct and no damage.
For any question, please contact us at:
Latest Version XPROG V5.74 XPROG-M Box ECU Programmer with USB Dongle
Top 6 Reasons to Get Newest XPROG-M V5.741. Latest software version: V5.74
2. This is the only version XPROG-M can decypte new version BMW CAS4.
3. Hard disk and USB Dongle, more convenient and secure.
4. Add new authorization: AUTH-0025 Authorized 11/4/2014
5. High quality with 1 year warranty.
6. No operation system limitation, software can be installed on Win XP, and Win 7
Tips for using XPROG V5.74:
1. You are disallowed to use this newest dongle to update the older version Xprog to V5.74
2. Close all of the computer anti-virus software. If not, X-prog software may be killed.
3. Disconnect the internet. If not, the internet may damage the hardware.
4. Uninstall all the old version xprog-m or xprog box software before you install V5.7. 0 software we provide , because our xprog-box hardware is not compatible with other lower or higher version software, otherwise the hardware will be damaged and will lose its warranty..
5. Never try to UPDATE, the hardware will be damaged if you want to try to upgrade it online, without any warranty.
Top 5 Bmw Frm3 Tools And Howto Guide Auto Diagnostic Toolbox
XPROG-M V5.74 Authorizations:
AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM)
AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)
AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)
AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)
AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)
AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.
AUTH-0008 BMW EWS3 authorization
AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory)
AUTH-0010 MB ZGS001 authorization
AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)
AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)
AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)
AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)
AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0020 ARM (Micronas, ..) Family authorization (allows to read/write internal flash and external serial EEPROM)
AUTH-0021 ARM (Micronas, ..) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage, Chassis number (VIN), serial number and PIN code).
AUTH-0024-3 9S12XE SECURITY
AUTH-0025-1 MPC/SPC5xxx Authorized 11/4/2014
XPROG-M V5.74 Adapters:
ADP-0001 TMS370 PLCC28 programming adapter
ADP-0002 TMS370 PLCC44 programming adapter
ADP-0003 TMS370 PLCC68 programming adapter
ADP-0004 Motorola HC05B/X PLCC52 programming adapter
ADP-0005 Motorola HC05B/X QFP64 programming adapter
ADP-0006 ST M35080 in-circuit programming adapter
ADP-0008 TMS374 family in-circuit programming adapter
ADP-0009 MC68HC05V12 programming adapter
ADP-0010 TMS374 on-board programming adapter
ADP-0011 HC11EA9/E9 programming adapter
ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter
Additional adaptor for 5M48H P-Flash
Xprog 5.74 has additional authorizations shown as following photos:
Other ECU ->Chrysler-DodgeJeep->BCM-GRAND_CHEROKEE_WK_2014_Flash
Other ECU ->GM ECU->SAF-XC164CS-16F
Other ECU ->HONDA Bikes->CB650F 2015_Code_Flash
Other ECU ->Renault ClioOther ->EPS_ST10F269
Other ECU ->Renault Modus ->ECU_SAK-XC164CS-32F
Xprog 5.74 Software Display:
We are here for you:
Whatsapp: +86 18259252285